Forum Posts

• lightings outian

  • 3 posts
  Posted in the topic Your stitches need to stretch with the fabric in the forum Weight Loss

  August 29, 2016 9:55 PM MDT

  Tips and Techniques for Sewing with Rayon Fabric knittingfabric.cc Knits

  Sewing knits can strike fear into the heart of even the bravest sewist. But it's actually not so scary-- even if you don't have a fancy serger (although they do make the job a bit easier). Here are a few sewing knits tips:

  Sewing knits is much easier when you have the proper tools. You'll want to pick up some ballpoint needles and pins.

  Ballpoint needles and pins have a slightly rounded tip, so they push between the loops in the knit, rather than piercing holes through it like a regular needle. (You might also see them labeled as "stretch" or "jersey" needles.)

  A twin needle (two needles side-by-side) will give you professional looking topstitching. Most machines can work with a twin needle, but check your manual for specific threading instructions.

  Twin needles will sometimes require tension and presser foot adjustment. Make sure your settings are perfect by practicing a bit on scrap fabric before diving into your topstitching.

  Set-up your machine for the zig-zag stitch. A straight stitch is a no-go because your stitches need to stretch with the fabric.

  Some machines have a mock overlock stitch, which mimics the look of serged seams, Suede Fabric knittingfabric.cc so try that setting out as well.

• lightings outian

  • 3 posts
  Posted in the topic 300x1200 Led Panel outianlighting.com in the forum Exercise

  August 29, 2016 9:46 PM MDT

  Eco friendly operation Led Light Panel outianlighting.com

  The low consumption of the LED panel lights means they are an eco-friendly technology and can result in a significant saving in energy.

  This type of light causes minimal pollution throughout the manufacturing process. Also, there is no mercury contained in the product. A single panel is similar to having to use six fluorescent bulbs.

  A benefit of using fewer bulbs to light the home or office is the ability to lower the high-voltage requirements.

  Long life usability

  LEDs are an extremely reliable technology, most flat panels have a product life of 50,000 hours!

  Light Adjustment

  Most of the LED panel lights give the option to adjust the strength of the light which means it is possible to benefit from the soft, eye-friendly light and avoid the harsh, unpleasant light.

  Shock-resistant

  These ceiling lights are built to be shock-resistant and quite difficult to damage. Most of the lights are manufactured in a hard resin and not the less superior tungsten glass. Plus, this design also helps to control temperature issues.

  Less heat dissipation

  The LED panel lights can provide light which has full spectrum as the white light has. But the spectra of a fluorescent lamp are not complete 300x1200 Led Panel outianlighting.com and some colors are not present.

   

• lightings outian

  • 3 posts
  Posted in the topic Tape Aluminum Foil chinaaluminumfoil.com in the forum Supplements

  August 29, 2016 9:40 PM MDT

  Aluminum Tape chinaaluminumfoil.com has many uses in heavy industry because it can be made in a variety of thicknesses and it also is semi-conductive and reflective of heat and light.

  This metal is also waterproof after a thickness of greater than one millimeter and therefore can be used to keep liquid out of certain materials and it is also used inside many different consumer electronics devices.

  Aluminum foil has a agleam ancillary and a matte side. The agleam ancillary is produced if the aluminum is formed during the final pass.

  It is difficult to aftermath rollers with a gap accomplished abundant to cycle a individual area of foil. For the final pass, two bedding are formed at the aforementioned time, acceleration the array of the roll.

  If the bedding are after separated, the two central surfaces are matte, and the two alfresco surfaces are shiny.

  One of the above categories in which aluminum has a actual ample access is in the busline sector. This metal has abounding uses in the busline area because of its adaptability and actual top compactness strength.

  A actual accepted appliance in which you would see aluminum acclimated in the busline area is aircraft. A lot of aircraft fuselages and wings are fabricated from aircraft-grade Tape Aluminum Foil chinaaluminumfoil.com .