The post was not added to the feed. Please check your privacy settings.
GOLOHO POLYMER (CHANGZHOU) CO., LTD. golohopolymer FEATURES OF GOLOHO-L213
UV rapid cure
secondary moisture cure
one-component, 100% solid... moreFEATURES OF GOLOHO-L213
UV rapid cure
secondary moisture cure
one-component, 100% solid content
low viscosity
-55℃~120℃ temperature resistance: -55~120℃
Description
GOLOHO-L213 is a single component, UV-moisture curable, acrylated polyurethane conformal rtv silicone coating
TYPICAL APPLICATIONS OF GOLOHO-L213
Coating and protection on the complex shape of PCB and integrated circuit
TYPICAL PROPERTIES OF GOLOHO-L213
Model L213
Appearance colorless/light-yellow liquid
Resin acrylated polyurethane
Solid content % 100
Density g/cm3 1.09
Viscosity cP 100
Cure time s 10
Illumination intensity mJ/cm2 500~600
Temperature resistance ℃ -55~120
Dielectric strength kV/mm 43
Volume Resistivity Ω·cm 6.3×1011
Dielectric constant 1MHz 4.01
Dielectric dissipation factor 1MHz 0.12
HOW TO USE GOLOHO-L213
As it is sensitive to light, these kinds of light like sunlight, UV, artificial light must be controlled to decrease its exposure during storage and handing process.
All surface in contact with the material should be clean and free from impurity, grease, or other contaminants prior to dispensing the material to acquire expectant results
Application methods: artificial brush, mechanic spray, dip
Cure: proper length wave UV light is needed to achieve constant depth of cure, and the cure time depend on the lamp intensity and distance from the source
Some temperature sensitive substrate should be cooled before coating.
SPECIAL VERSION OF GOLOHO-L213
The product is nontoxic after curing, but avoid contact with skin. If contact the compound with eyes, rinse immediately with plenty of water
Shelf life and storage conditions
Shelf life: in sealed original containers 12 months at 5~25℃
Storage: protect from UV light, protect against humidity
FOR USERS
Without notice, the contents of this article may be changed due to the product performance improvement and specification.
We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
Our products are developed for general industrial use.
The data are real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before user's applying. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensures the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there is any quality problem. GOLOHO POLYMER will provide replacement or refund if any quality problem confirm. Users should be responsible for ensuring that their applications comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO china does not undertake any responsibility for any safety and loss problems.
Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389; for more details, please visit web site:goloho@sina.com
GOLOHO POLYMER (CHANGZHOU) CO., LTD. golohopolymer RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone rubber / RTV 1 silicone rubber are used in bonding, sealing, encapsulating photovoltaic module... moreRTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone rubber / RTV 1 silicone rubber are used in bonding, sealing, encapsulating photovoltaic module components including photovoltaic frame, junction box and micro-inverter, power industry including circuit boards, electronic components, light emitting diode industry including lamp beads, lamp cap and light bar, home appliance including air conditioner, fridge, washing machine, and microwave oven, induction cooker, new energy vehicle including electronic component. GOLOHO RTV-1 silicone rubbers are designed to provide long-term bonding, sealing, encapsulating and protection against moisture, environmental degradation, mechanical and thermal shock, heat dissipation and vibration where a room-temperature-curing product is preferred.
When using RTV-1 silicone rubber, all surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone, or methyl ethyl ketone. Apply a bead of RTV-1 silicone rubber to one of the prepared surfaces, then quickly cover with the other substrate to be bonded. On exposure to moisture, the freshly applied material will “skin over” in about 10 to 15 minutes at room temperature and 50% relative humidity. Any tooling should be completed before this skin forms. The surface is easily tooled with spatula. GOLOHO chemical will be tack free in about 5 to 60 minutes. After skin formation, cure continues inward from the surface. In 24 hours (at room temperature and 50% relative humidity), GOLOHO RTV-1 silicone rubbers will cure to a depth of 2 to 3 mm. Very deep sections, especially when access to atmospheric moisture is restricted, will take longer to cure completely. Cure time is also extended at lower humidity levels. Before handing and packaging bonded components, users are advised to wait a sufficiently long time to ensure that the integrity of the adhesive seal is not affected. This will depend on many factors and should be determined by user for each specific application.
As the silicone rtv supplier, if you want to buy rtv / buy silicone rtv, please contact us to get the rtv-1 silicone sealant.