FUXI® Solvent Free Epoxy Self-leveling Topcoat is a floor paint coating independently developed by our company that can meet the strict requirements of the GMP specification for high clean places. This product is formulated with a special epoxy resin with 100% solid content as the base material. It has the excellent characteristics of environmental protection, high gloss. less
Crystal Tang Epoxy Tie Coat #Epoxy#Tie#Coat
Epoxy tie coat has very good adhesion to stainless steel and non-ferrous metal substrates. It has excellent flexibility and shielding properties. It has very low water permeability and can be cured even at -10°C. It is... moreEpoxy Tie Coat #Epoxy#Tie#Coat
Epoxy tie coat has very good adhesion to stainless steel and non-ferrous metal substrates. It has excellent flexibility and shielding properties. It has very low water permeability and can be cured even at -10°C. It is mainly used at ship bottoms as a tie coat for anti-fouling paint, also used for non-ferrous metals, as a connecting primer https://www.paint-in-china.com/products/epoxy-tie-coat.htmlless
Advantages of Clear Coat Spray Gun
Without a thick clear coating, good paint work cannot be done. By using a layer of polyurethane or other water-resistant material, the life of any wooden... moreCLEAR COAT SPRAY GUN
Advantages of Clear Coat Spray Gun
Without a thick clear coating, good paint work cannot be done. By using a layer of polyurethane or other water-resistant material, the life of any wooden object can be greatly increased. Of course, it can be difficult to get the desired smoothing effect. Clear Coat Spray Gun can solve this problem by its own equipment, it is much easier to obtain a smooth coating. less
Characteristics of Base Coat Spray Gun
The spray width of the base coat spray gun must be wider than that of the atomized layer. You only need to spray the base evenly on the surface to be... moreBASE COAT SPRAY GUN
Characteristics of Base Coat Spray Gun
The spray width of the base coat spray gun must be wider than that of the atomized layer. You only need to spray the base evenly on the surface to be sprayed. The atomized layer should be smaller than the wet layer, especially after spraying. The spraying of the base requires good fillability, and the fillability is mainly accomplished by a wet layer.
Why need Base Coat Spray Gun
A base coat is basically a paint applied to a primer layer. The base coatings do not have any hardeners or enhancers, as they are only raw paint applied to the primer. They don't provide any protection and usually don't stay there by themselves; otherwise, there will be stains on the paint. When this happens, moisture will slowly infiltrate, eventually causing the surface of the frame to rust.
To avoid this, the base coat is used with a clear coat or a urethane base coat. This will provide better and effective protection from paint, primer and frames from the elements. It also gives a smooth lacquer finish because of the clear coating. The use of base coats and clear coats is one of the most common methods of painting, because when they are combined, they protect the surface and at the same time look shiny. The base coat spray gun can perfectly fulfill this demand. less
ZEGO base coat spray gun provides better and effective protection from paint, primer and frames from the elements. Professional advice and good service. RFQ today!