GOLOHO POLYMER (CHANGZHOU) CO., LTD. golohopolymer's Album: Wall Photos
Photo 8 of 8 in Wall Photos

Pin It
FEATURES OF HIGH PERFORMANCE SILICONE ADHESIVE/SEALANT GOLOHO-64W
·Convenient: one-part, rapid cure at room temperature
·Neutral, no corrosion to metal, no prime
·Excellent thermal conductive, heat dissipation and adhesion
·Small power heater can be directly bonded on the radiator without tighten the firmware again to avoid the short circuit because of fasteners loose. Thus, reliability is improved, meanwhile, work time has been decreased
·Dissipate the heat and tight according to contacting heating device with radiator by the material
·Long term reliability and service life to sensitive circuit and components
·Insulation, stress-relieving, vibration absorption, Use at: -50~200℃
·Resistance to weather, heat, chemical erosion
·Excellent insulation performance
·Can be exempted from ultraviolet light, ozone and chemical effects outdoors
·Particularly applicable to high demanding PCB, such as instrument and apparatus, sensor, remote sensing system
·Color: white
·Multiple packaging sizes are available for this product, 100ml Al tubes, 310ml and 2.6L plastic bottles
·Shelf life: 6 months from the production date
TECHNICAL DATE OF HIGH PERFORMANCE SILICONE ADHESIVE/SEALANT GOLOHO-64W
Uncured
Appearance Semi-paste
Color White
Surface curing(min) ≤15
Electric/mechanical properties(25℃, 75%, 7days)
Density g/cm3 ≥1.3
Durometer(ShoreA) ≥40
Shear strength  (Mpa) ≥1.3
Tensile strength  Mpa ≥1.8
Elongation  % ≥160
Thermal conductivity  W/m·k 0.6~0.8
Dielectric strength kV/mm ≥21
Volume resistivity   Ω﹒cm 0.5×1015

USE AND STORAGE OF HIGH PERFORMANCE SILICONE ADHESIVE/SEALANT GOLOHO-64W
Cut the tip then extrude the adhesive according to demand. Cure at room temperature. For more details or other special appliance, contact our customer service department.
Extrusion diameter: depend on the sealing gap
Cure time: depend on the temperature and humidity of the working conditions
Storage: keep in cool and dry place.
HANDING CAUTIONS OF GOLOHO-64W
Avoid fire
Avoid contact with skin, eyes, and clothing. Wash eyes for 15min once touch with it. Remove material from skin with dry cloth, water, and soap
Wash hands after using
Keep clean of the substrate
Physical and chemical properties
Appearance(color): red
Appearance(state): semi-paste
>1.3 Density(25℃): 1.3
Solubility: indissolvable
Flammability: inflammability
Volatility: none

SAFETY MEASURES OF GOLOHO-64W
FIRE MEASURES OF GOLOHO-64W
Extinguisher
Component: water, powder, carbon dioxide

Toxicity of GOLOHO-64W
kin erosion: none
Eyes stimulation: light
Skin stimulation: none

Environment impact of GOLOHO-64W
The product of combustion is hardly any toxicity to the environment or living things

Facilities of GOLOHO-64W
Global or local exhausting and flushing facilities

Transport information of GOLOHO-64W
Not restricted
NOTES OF HIGH PERFORMANCE SILICONE ADHESIVE/SEALANT GOLOHO-64W:
The article is considered to be reliable.
All the data are the non-standard values. Without notice, the contents of this article may be changed due to the product performance improvement and specification.
We just only ensure the specifications of our products. You have to test the product before using to confirm if it is suitable for your use.
Our products are developed for general industrial use.
Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389

RTV-2 Silicone Rubber
RTV-2 silicone rubber system is one of the three RTV silicone rubber systems that is most widely used. The silicone rubber can be turned into elastomer with the net structure at room temperature when exposed to moisture in the air. GOLOHO RTV-2 silicone rubber not only has high-temperature resistance, aging resistance, water resistance and good electrical properties but also has good flowability and strong tensile strength.

#high #performance #silicone
https://www.goloho-polymer.com/products/high-performance-silicone-adhesivesealant-64w.html

GOLOHO POLYMER (CHANGZHOU) CO., LTD. golohopolymer's Album: Wall Photos


0 comments