Loading ...
-
PTFE Adhesive Tape Introductions
PTFE adhesive tape is structured by PTFE coated glass cloth applied with pressure-sensitive silicone adhesive on one side, main features of PTFE adhesive tape is excellent release surface, high temperature resistant up to... morePTFE Adhesive Tape Introductions
PTFE adhesive tape is structured by PTFE coated glass cloth applied with pressure-sensitive silicone adhesive on one side, main features of PTFE adhesive tape is excellent release surface, high temperature resistant up to 260°C( 500°F) and strong adhesion under high heat.
The PTFE coating we use is imported from Japan which provides quick release, abrasion resistant and smooth surface. Basic material is woven fiberglass fabric which makes the tape tear resistant. Pressure sensitive adhesive is imported from the USA which has relatively lower initial adhesion but higher adhesion under high heat, the adhesive will not residual on machine when peeling off.
PTFE adhesive tape can be with or without yellow release paper on the back, normally jumbo roll like 1m x 50m and 1m x 30m are with liner on the back, small rolls like 25mm x 10m, 50mm x 10m may with or without liner.
#adhesive #teflon #sheet
https://www.mutiflon.com/ptfe-adhesive-tape/ less
-
PTFE Coated Fabrics Introductions
PTFE coated fabrics are made by fiberglass fabric impregnated with PTFE dispersion on one side or two sides, the material combines advantages of PTFE and main features of woven fiberglass fabric.
Typical properties of... morePTFE Coated Fabrics Introductions
PTFE coated fabrics are made by fiberglass fabric impregnated with PTFE dispersion on one side or two sides, the material combines advantages of PTFE and main features of woven fiberglass fabric.
Typical properties of PTFE are nonstick and temperature resistance, PTFE coating makes the fabric 100% nonstick to any object under low and high temperature between -73-260 ℃(-100-500℉). The strong multiply carbon-fluorine bonding structure of PTFE makes it high resistance to solvents, acids, and bases. PTFE is also one of the lowest coefficients of friction, suitable for applications where need excellent abrasion resistance.
Fiberglass yarn has high strength while lightweight, it is twice as strong as steel wire and more cost-effective compared to other synthetic fabric.
#teflon #coated #fiberglass #cloth #manufacturers
https://www.mutiflon.com/ptfe-coated-fabrics/ less
-
PTFE Zone Tape Introductions
PTFE zone tape is with high temperature adhesive along the edge and leave an adhesive-free center in the middle. The tape is made from woven fiberglass substrates impregnated with PTFE, then process pressure sensitive... morePTFE Zone Tape Introductions
PTFE zone tape is with high temperature adhesive along the edge and leave an adhesive-free center in the middle. The tape is made from woven fiberglass substrates impregnated with PTFE, then process pressure sensitive silicone adhesive along the edge of the tape.
The adhesive-free center zone minimize the thermal barrier between heating seal part and sealing material, allows for fast heat transfer through the tape, high temperature adhesive offers easy adhesion to the heating element or silicone rubber and eliminates the need for mechanical fastening, thus the tape is perfect for heat sealing equipment which use flexible ribbon wire to help to extend their working lifetime. Coated with PTFE, the tape provides a non-stick surface to sealing parts, polybag just release from the heating wire quickly under high temperature.
#teflon #adhesive #tape
https://www.mutiflon.com/ptfe-teflon-seamless-belt/ less
-
Teflon Baking Mat Introductions
Teflon baking sheet is good alternative for baking paper because it is reusable and has a nonstick surface on both sides. The sheet is coated with PTFE, this non-stick coating allows you to bake without adding butter, fat... moreTeflon Baking Mat Introductions
Teflon baking sheet is good alternative for baking paper because it is reusable and has a nonstick surface on both sides. The sheet is coated with PTFE, this non-stick coating allows you to bake without adding butter, fat or oil, place one piece in you baking tin and oven tray, nothing will sticks and keep your oven tray clean. Teflon baking sheet withstands high heat up to 500°F, suitable for all ovens like gas, electric and microwave oven. With durable fabric reinforced inside, Teflon baking sheet can be reusable time and time again, thus it is cost effective.
Teflon baking sheet is 100% nonstick, you can bake sticky pastries, cheesy dishes on the liner without worrying about messy removal, you will not need to scrub pans any more which means it will save your time and help to protect your cookware.
Teflon Baking Mat Details
Teflon baking sheet provides healthy and low calorie cooking, no need for greasing, butter and flouring by using this liner because its surface does not stick to anything, cookies, bread or meat will just slip off after baking or roasting.
Teflon baking sheet is simply wiped clean and reusable, when you finish cooking, simply wipe this liner with a damp cloth or wash in soapy water. The liner is also a dishwasher, need to place on the top rack. But we recommend hand-wash to preserve its life. After cleaning, allow air to dry and stock by lay flat or rolled, the liner can be reused for several times.
Teflon baking sheet is food grade, the sheet is coated with food-grade PTFE, material passed FDA and LFGB, can touch food directly even under high temperature.
Teflon baking sheet improves productivity and efficiency for food processing, the liner is 100% nonstick, easy to clean, you don’t need to take time for messy cleaning, it will increase uptime.
#Teflon #Coated #Sheets
https://www.mutiflon.com/teflon-baking-mat/ less
-
Teflon fiberglass in thickness of 0.024” (0.60mm) is durable and constructed by thick woven fiberglass, then impregnated two sides with PTFE. Color is normally in white or beige. This PTFE fiberglass is commonly used as release sheet and made into PTFE... moreTeflon fiberglass in thickness of 0.024” (0.60mm) is durable and constructed by thick woven fiberglass, then impregnated two sides with PTFE. Color is normally in white or beige. This PTFE fiberglass is commonly used as release sheet and made into PTFE conveyor belts. The material has high tensile strength and superior release property, perform well during wide temperature range from -73-260°C.
Features of Teflon Coated Fiberglass Cloth
Smooth nonstick PTFE surface
Wide width range from 1000mm to 2800mm
Chemical resistant, can be used in rubber, polymer industry
Abrasion resistant, long lifetime
Good heat transfer
Convenient to use and install
Applications of Teflon Coated Fiberglass Cloth
Teflon fiberglass is used in a wide range of applications related to casting an curing of thermoplastics. The material offers long-lasting performance and saves operating time. Applications may include：
Vulcanizing process of PVC backing carpet
Teflon conveyor belts are ideal to be used in production of PVC backing carpet. The melted PVC, PU or chemical blown foam will be pulled on the Teflon belt, the belt will transport material to ovens for curing and vulcanization. Our PTFE belting withstand high temperature and runs smooth and stable in the oven.
Vulcanizing process of PVC backing carpet
Curing process of foam
Teflon belt made of Teflon fiberglass is ideal to transport soft polymeric materials in the expansion process. The PTFE conveyor belts surface resist all chemicals and provides nonstick surface, thus the polymeric has no chemical reaction with the belt and will not stick on the belt.
#teflon #coating #glass #fiber #cloth
https://www.mutiflon.com/teflon-coated-fiberglass-cloth/ less
-
Teflon Conveyor Belt Joint Types Introductions
Teflon belt joint type is made by Teflon coated fabric connected with different kinds of the splice to make it be endless. We fabricate custom belts in different thickness, specialty splices and even... moreTeflon Conveyor Belt Joint Types Introductions
Teflon belt joint type is made by Teflon coated fabric connected with different kinds of the splice to make it be endless. We fabricate custom belts in different thickness, specialty splices and even guiding systems for a fit wide range of machines. Teflon belt is long-lasting working under temperature of 260°C( 500°F) and withstand max temperature up to 360°C( 600°F), the surface of the belt is 100% nonstick and do not affect by almost all chemicals.
Teflon Conveyor Belt Joint Types Industries
Teflon belt joint type is supplied by a wide range of industries: Packaging industry, food industry, carpet industry and rubber industry.
Teflon belt joint type for packaging industry: Teflon side sealing belt for tissue and paper wrapping is always made by our MT9035AJ material, connected by overlap joint and install tracking studs to prevent running off-center, molten plastics will not build up on the belt’s surface. Teflon heat sealing band is also used in this industry, this band is normally made by our MT9013AJ and MT9025AJ with an overlap joint, the belt is used to seal thermoplastic normally a bag or pouch, typical widths of sealing belt is from 12mm-30mm.
Teflon belt for the food industry: The belt is also called tortilla press belt which is made by our high-performance PTFE fabric in thickness of 0.25mm and 0.35mm, the material is specially treated to improve its release property an oil-resistant, typical connect way of this belt is castellated joint.
Teflon belt joint type for carpet industry: Teflon belt for carpet and carpet title manufacturing is using our MT9100W which is in thickness of 1mm, there are texture grains on the surface that will be transferred to the surface of carpet titles.
Teflon belt with joint for the rubber industry: Teflon belt made of our MT9035AJ is perfect to transport extruded rubber rod into curing oven, the belt is heat resistant and nonstick, extruded rubber will not stick on it.
#teflon #conveyor #belt
https://www.mutiflon.com/teflon-conveyor-belt-joint-types/ less
Loading ...
There are no more results to show.
Find in Members
Find in Channels
Find in Projects
