Loading ...
-
Grid-Tie Inverters
The grid-connected inverter is a special inverter. In addition to converting DC power into AC power, the output AC power can be synchronized with the frequency and phase of the mains power, so the output AC power can be returned to... moreGrid-Tie Inverters
The grid-connected inverter is a special inverter. In addition to converting DC power into AC power, the output AC power can be synchronized with the frequency and phase of the mains power, so the output AC power can be returned to the mains. Grid-connected inverters are commonly used in applications where some DC voltage source (such as a solar panel or a small wind turbine) is connected to the grid.
Advantages of Grid-Tie Inverters
High efficiency. Before the grid-connected inverter generates electricity, it needs to take power from the grid, detect the voltage, frequency, phase sequence, etc. Will be connected to the grid for power generation.
High reliability: When an accident or disturbance in the power system causes a voltage sag at the grid-connected point of the photovoltaic power station, within a certain range of voltage drop and within a certain time interval, the photovoltaic power station can guarantee continuous operation without going off-grid.
The adaptable range of input voltage is wide, not only can be used in rooftop power generation scheme, but also can be used in various small power stations.
How Do Grid-Tie Inverters Work?
When the public grid is powered off, the grid side is equivalent to a short-circuit state. At this time, the grid-connected inverter will be automatically protected due to overload. If the solar battery array has energy output, the inverter will run in the state of independent operation.
Of course, the premise of running alone is that the solar array can provide enough power at that time. If the load is too large or the sunshine conditions are poor, the inverter cannot output enough power, and the terminal voltage of the solar cell array will drop, thereby reducing the output AC voltage and entering the low-voltage protection state. When the power grid is restored, it will automatically switch to the regenerative state.
#solar #grid #tie #inverter #price
https://www.raisunpower.com/products/grid-tie-inverters/ less
-
How about the Self-locking Performance of Nylon Tie Wrap?
The nylon tie wrap is a kind of cable tie, which is made of nylon chemical materials, and can be better used to fix various cables. Of course, in order to meet the requirements of better use, it... moreHow about the Self-locking Performance of Nylon Tie Wrap?
The nylon tie wrap is a kind of cable tie, which is made of nylon chemical materials, and can be better used to fix various cables. Of course, in order to meet the requirements of better use, it needs to be better based on the actual situation. And finally, the quality will also be greatly improved. These are all worthy of our more attention.
In order to achieve a better self-locking fixing function, it is definitely better to choose a cable tie produced by a high-quality manufacturer at this time, and the product price can also be more reasonable.
In the past, to fix various cables or materials, cords or iron wires, or ties with steel wires were chosen. However, these will cause a large waste of resources and are not ideal in terms of regulatory effects. However, the use of nylon tie wrap now can better solve the problem of waste of resources and the problem of unstable fixation. After all, nylon material is very strong in corrosion resistance, moisture resistance and tensile resistance, so it can meet the requirements when used in more occasions.
In general, nylon cable ties are excellent in self-locking and fixing performance, and have better performance in stability, so it is important to say how to make a better choice. After all, the cable ties provided by different manufacturers will also differ in the choice of nylon material. So, to ensure that they can meet the requirements of better fixing and self-locking, you need to choose a more professional manufacturer-SAICHUANG!
#tie #wrap #material
https://www.sc-connector.com/how-about-the-selflocking-performance-of-nylon-tie-wrap.html less
-
A Tip for Untying A Nylon Cable Tie
Many people treat nylon cable ties as a disposable item and will cut them off directly after use. In fact, there is a knack for untying the nylon tie which only takes 1 second, just touching a place with your hand.... moreA Tip for Untying A Nylon Cable Tie
Many people treat nylon cable ties as a disposable item and will cut them off directly after use. In fact, there is a knack for untying the nylon tie which only takes 1 second, just touching a place with your hand. Let's take a look at how to untie a zip tie!
Here is the method.
First, we should know the head structure of the nylon cable tie. It can be seen that there is a buckle that can be pulled inside the head of the cable tie. After understanding this feature, let's talk about how to quickly untie the cable tie in 1 second. When unfastening the nylon cable tie, press the buckle on the head of the cable tie with the nail of your thumb and break it outwards. Then, it can be easily untied by pulling the tie again, which is fast and convenient. However, how to untie the tie without nails? In fact, the method is also very simple, only a toothpick can be done. The operation is similar. When untie the tie, use a toothpick to poke into the buckle on the head of the tie, and then pull the tie to easily untie it.
After knowing how to untie the cable tie, there is one more method of hiding the cable tie. The cable tie strip has two sides, an uneven one with gears, and an relatively smooth one. Therefore, when using a cable tie to bind things, the cable tie can be used backwards if the elasticity of the thing is not large. In this way, no tools are needed to untie the tie while the tied things will not be loosened, which solves the troubles of many people.
Thus, there is no need to waste the nylon cable tie. How about trying the way now?
#how #to #untie #a #zip #tie
https://www.sc-connector.com/a-tip-for-untying-a-nylon-cable-tie.html less
-
About Self-locking Nylon Cable Ties
Ⅰ. Features of the self-locking nylon tie wrap
1. It is easy to use, fast, and efficient. It is self-locking and uses environmentally friendly materials that have been strictly tested, which can be a substitute for... moreAbout Self-locking Nylon Cable Ties
Ⅰ. Features of the self-locking nylon tie wrap
1. It is easy to use, fast, and efficient. It is self-locking and uses environmentally friendly materials that have been strictly tested, which can be a substitute for a new type of strapping rope.
2. It has good acid resistance, corrosion resistance, insulation, resistance to ageing, and strong endurance.
3. The flat tooth design of the body is uniform, and the head has a gear design, which is easy to bind and is not easy to trip, withstands extremely strong, flame retardant, temperature corrosion resistance, and not easy to age.
Ⅱ. Material of the self-locking nylon tie wrap
The self-locking nylon cable ties are made of nylon 66 by injection moulding. The wall of the product is thin, the injection process is relatively large, and all the moulds, injection processes and materials are required to be very particular. The characteristics of nylon 66 are as follows:
1. Excellent mechanical properties. Nylon has high mechanical strength and good toughness.
2. Good moisture and friction resistance. Nylon has good self-lubricity and low friction coefficient, so it has a long service life as a transmission component.
3. Good elasticity, good fatigue resistance, and can withstand tens of thousands of double deflections.
4. Good corrosion resistance, no mildew, no fear of moths, alkali resistance, but not acid and oxidant resistance.
5. Good dyeing performance.
6. The relative density is small, only 1.04-1.14. Except for polyolefin fibre, it is the lightest fibre.
Ⅲ. Application range of self-locking nylon cable ties
Any place that needs to be strapped. It is widely used for bundling internal wiring of televisions, computers, etc., domestic appliances, lighting, motors, electronic toys and other products, fixing of internal circuits, fixing of oil pipelines of mechanical equipment, fixing nylon gears of cable circuits on ships, and packaging of bicycles. Or bundling other objects, it can also be used in agriculture, gardening, handicrafts and other bundling items, and also for various supermarkets and mass sales in Europe, America and other countries.
If you want to know more information about nylon cable tie price, please contact SAICHUANG, one of the most reliable cable gland manufacturers.
Ⅳ. The use of self-locking nylon cable ties
1. When operating and using, use the tightening force, which cannot exceed the tensile force of the nylon cable ties.
2. The diameter of the strapped object should be smaller than the diameter of the nylon cable tie, and the remaining length of the strap body should be 5-8cm after tightening.
3. Nylon cable ties can maintain excellent mechanical properties and heat ageing resistance in a wide temperature range (-40~120℃).
4. Nylon cable ties can maintain excellent mechanical properties in a humid environment. Nylon cable ties are hygroscopic, with increased humidity (water content), higher elongation and impact strength, but the tensile strength and rigidity are gradually reduced.
5. Nylon cable ties have good integrity, the electrical rated temperature is less than 105℃ without affecting its performance, and the flame retardancy reaches the UL test 94V-2 level.
Ⅴ. Self-locking nylon cable tie packaging
It changes depending on the specifications.
#self #locking #plastic #cable #tie
https://www.sc-connector.com/about-selflocking-nylon-cable-ties.html less
-
Tie Dye Hoodie
https://www.sglsports.com/products/tie-dye-hoodie/ />
#hoodie #dye #tie
SGL, a professional tie dye hoodie manufacturer, specializes custom dye hoodie and tie dye hoodie wholesale. At Tie-dye,we have a large variety of sizes and colours... moreTie Dye Hoodie
https://www.sglsports.com/products/tie-dye-hoodie/ />
#hoodie #dye #tie
SGL, a professional tie dye hoodie manufacturer, specializes custom dye hoodie and tie dye hoodie wholesale. At Tie-dye,we have a large variety of sizes and colours available, with each order being produced to the highest quality. Cotton blend. Polyester blend. less
-
Material of adhesive tie mount: Nylon 66 certificated by UL, 94V-2, with adhesive sticker.
Color of adhesive wire tie mount: Natural (or white, standard color), UV black, and other colors are available as requested.
Package of self adhesive cable... moreMaterial of adhesive tie mount: Nylon 66 certificated by UL, 94V-2, with adhesive sticker.
Color of adhesive wire tie mount: Natural (or white, standard color), UV black, and other colors are available as requested.
Package of self adhesive cable mounts: 100PCS, or as customer's requirement.
Application of self adhesive tie wrap mounts: Remove the cover of the adhesive and stick the piece properly, then put in cable tie for use. Used where hole-drilling is not allowed.
Technical Specification Of Self-adhesive Tie Mounts
#zip #cable #tie #adhesive #mount
https://www.hontcabletie.com/products/self-adhesive-tie-mounts.html less
-
Cable Tie Mounting Bases (Self Adhesive base) are an effective and durable wire management mounting product for routing and securing wires and cables in place. These cable mounts are easy to install to the mounting surface. The most regular tie mount... moreCable Tie Mounting Bases (Self Adhesive base) are an effective and durable wire management mounting product for routing and securing wires and cables in place. These cable mounts are easy to install to the mounting surface. The most regular tie mount base is square in shape with a rubber backed adhesive for mounting. The tie base design also includes a screw hole located in the center of the base.
#cable #tie #mount #manufacturer
https://www.hontcabletie.com/products/tie-mounts-cable-tie-holder/ less
-
The cable tie holders (also called nylon cable tie mounts) are made of high-quality nylon material, which is lightweight and anti-aging. The color of the nylon cable tie mounts can be black or white. The zip tie cable mounts can be easily concealed for a... moreThe cable tie holders (also called nylon cable tie mounts) are made of high-quality nylon material, which is lightweight and anti-aging. The color of the nylon cable tie mounts can be black or white. The zip tie cable mounts can be easily concealed for a neat appearance.
The sticky cable tie mounts can be widely used for wire management clips and electronic cord organizers. The cable tie mounting base for cable ties is a very good solution for securing cables to the back of televisions and home theatre equipment, running cabling along the wall, running cabling along the roof (indoors), and under desks and tables.
#zip #tie #wire #holder
https://www.sc-connector.com/products/cable-tie-mounting-base/ less
-
Epoxy Tie Coat
#Epoxy #Tie #Coat
Epoxy tie coat has very good adhesion to stainless steel and non-ferrous metal substrates. It has excellent flexibility and shielding properties. It has very low water permeability and can be cured even at -10°C. It is... moreEpoxy Tie Coat
#Epoxy #Tie #Coat
Epoxy tie coat has very good adhesion to stainless steel and non-ferrous metal substrates. It has excellent flexibility and shielding properties. It has very low water permeability and can be cured even at -10°C. It is mainly used at ship bottoms as a tie coat for anti-fouling paint, also used for non-ferrous metals, as a connecting primer
https://www.paint-in-china.com/products/epoxy-tie-coat.html less
-
1-Piece Fixing Tie For Weld Stud
1-Piece fix Tie for Weld Stud is used for welding studs or ISO bolts as well as cable strapping and protection, and is primarily designed for cable tie fixing in the automotive industry.
Installation of Piece fix Tie for... more1-Piece Fixing Tie For Weld Stud
1-Piece fix Tie for Weld Stud is used for welding studs or ISO bolts as well as cable strapping and protection, and is primarily designed for cable tie fixing in the automotive industry.
Installation of Piece fix Tie for Weld Stud is simple and tool-free. The head is mounted in a fixed position and can be stacked for installation applications requiring strapping from different directions.
Langrun Electric's 1-piece Fix Tie for Weld Stud is made of high-quality PA66 material that stands for short periods of extreme temperatures. The production standard of Piece fix Tie for Weld Stud meets the requirements of IATF16949 quality system.
Types of 1-Piece Fixing Tie For Weld Stud
150-10141 Black Screw Cable Ties For Weld Studs
150-21290 Weld Stud Fixing Black Plastic Screw Mount Cable Ties
155-46302 Screw Mount Fixing Cable Tie
156-00079 156-00686 Moveable Screw Mount Fixing Tie For Weld Studs
156-00080 SB5 Series PA66 Automotive Screw Mount Cable Ties
156-00292 Automotive Wire Hardness Cable Ties
156-00302 Moveable Black Plastic Screw Mount Cable Ties
156-00802 Automotive Screw Mount Cable Ties With Sb5 Clip
156-01411 Screw Mount Cable Tie With Pipe Clip
157-00090 Automotive Cable Hardness Screw Mount Cable Ties With Weld Studs
157-00135 Moveable Automotive Screw Mount Cable Ties
157-00207 155-30602 PA66 Nylon Automotive Screw Mount Cable Ties
157-00208 Screw Cable Tie For Weld Studs
157-00209 M5 Screw Nylon Mount Cable Ties
157-00210 Black M5 Screw Mount Cable Ties
157-00211 M6 Screw Automotive Plastic Cable Ties
2-Piece Fixing Tie for Weld Stud ZDP200-7-M6
Automotive Screw Mount Fixing Tie For Weld Stud
PP9102701 ZDG159 x 8.3 1-Piece Fixing Tie For Weld Stud
ZDP200-7-M6 2-Piece Fixing Tie for Weld Stud
«12»
The Electrical Performance of 1-Piece Fixing Tie For Weld Stud
01
Wide application, suitable for complex applications and widely used in cars, trucks, heavy equipment, solar panels, wind power and other industries equipment wire harness fixing.
02
One-piece fixing ties, easy to install, no tools required.
03
High specification materials and superior design make a good stability.
#cable #tie #fixing
https://www.langrunconnector.com/products/1-piece-fixing-tie-for-weld-stud/ less
-
1-Piece Edge Clip Cable Tie
1-piece Edge Clip Cable tie is a tie that can be attached to the Edge of a plastic or metal mounting panel without drilling. It is composed of fixed position edge clip and cable tie, and the position of the head of the tie is... more1-Piece Edge Clip Cable Tie
1-piece Edge Clip Cable tie is a tie that can be attached to the Edge of a plastic or metal mounting panel without drilling. It is composed of fixed position edge clip and cable tie, and the position of the head of the tie is always clearly defined, even when installed.
The base section and the tie are permanently connected together. Once the cable tie is fastened around the cables the EdgeClip is presented ready for attaching to the panel. Suitable for automotive wire harness binding of various plate thickness and fixed position. The lashing head is immovable and suitable for the specific installation environment.
The 1-piece cable tie edge clip is widely used in the automotive industry to fix and bind cables, pipes and hoses, wire harness manufacturing, panel construction and electrical appliances industries.It is also suitable for a variety of plate thickness and binding diameter installation environment.
Types of 1-Piece Edge Clip Cable Tie
1-Piece Type Cable Tie with Edge Clip 082652
1-Piece Type Cable Tie with Edge Clip 082653
Automotive Wire Harness 1-piece Edge Clip Cable Tie A15-3724118
The Electrical Performance of 1-Piece Edge Clip Cable Tie
01
Good stability and strong pulling force.
Wide application, widely used in fixing the wire harness of cars, trucks, heavy equipment, solar panels, wind power and other industries equipment.
02
Easy installation, no tools required, just clip by hand.No drilling required, suitable for plastic and sheet metal of various thickness.
03
Easy installation, no tools required, just clip by hand.No drilling required, suitable for plastic and sheet metal of various thickness.
#cable #tie #edge #clip
https://www.langrunconnector.com/products/1-piece-edge-clip-cable-tie/ less
-
Plastic cable ties are made of UL approved nylon-66 (Nylon 66) by injection molding, with a fire rating of 94V-2, acid resistance, corrosion resistance, good insulation, resistance to aging, and strong endurance.
The operating temperature is minus 40 to... morePlastic cable ties are made of UL approved nylon-66 (Nylon 66) by injection molding, with a fire rating of 94V-2, acid resistance, corrosion resistance, good insulation, resistance to aging, and strong endurance.
The operating temperature is minus 40 to 90 degrees. The plastic cable ties are designed with an anti-return function, which can only be tied tighter and tighter, and there are also reusable ties. The plastic cable tie produced by Saichuang has the characteristics of fast lashing, good insulation, self-locking forbidden and easy to use. We offer extra long plastic cable ties, long plastic cable ties, black plastic cable ties, white plastic cable ties, reusable plastic cable ties and so on, according to your needs.
Plastic Ties FAQs
How about the tensile strength of your nylon cable ties ?
The tensile strength of all of our plastic zip ties can meet the standard.
The plastic cable ties produced by our company will be sampled and tested before shipment to ensure that the tensile force reaches the standard.
What is the packaging method of nylon cable ties? Whether to accept customized packaging ?
We can print your logo on the sticker and master carton.
Standard packing:
100 pcs/pkt + PE Polybag + Adhesive sticker + export carton
Carton size: 52*35*35 /54*32*32 cm
One pallet: 25 cartons (5x5 layers)
Customized Packing:
Header card packaging, Canister packing,other packing can be supplied according customers requirement.
Can the color of nylon cable ties be customized?
Yes, the color of the cable tie can be customized according to your requirements.
Can you provide samples ? Are the samples Free ?
Free samples are available for testing.
When can I get the price of plastic zip ties ?
Usually we quote within 12 hours after we get your inquiry. For urgent quotation, pls call us directly or add wechat or whatsapp to talk directly.
#zip #tie #plastic #type
https://www.sc-connector.com/products/plastic-ties-wraps/ less
Loading ...
There are no more results to show.
Find in Members
Find in Projects
Find in Channels
