Steel Deck Roll Forming Machine

#steel #deck #roll #forming #machine

The sheet produced by this steel roll forming machine has high strength with big wavelength, and adheres well to concrete. Used on tall buildings, it not only saves steel mold sheet, but also reduces the weight of the storey. 
The common thickness for final products depends on different material, normally it's 0.6-1.2mm. For the recommend profiles, we can recommend the popular end products and we can also design deck roll former according to your drawings.
Working process of the Steel Roll Former: Decoiling → Guided feeding → Roll forming → Cutting to length → finished panel 

Contact us Drawing Download
Technical Parameters Of Steel Deck Roll Forming Machine

No. Item Para Memo
1
Suitable material Type galvanized steel,
Thickness (mm) 0.6-1.2
Yield Strength (MPa) ≤345
Width (mm) 1220
2 Forming Speed (m/min) About 20 Not including cutting time
3 Forming main motor power(KW) 22 Depend on actual design
4 Main hydraulic station power(KW) 5.5 Depend on actual design
5 Decoiler motor power (KW) 5.5 Depend on actual design
6 Decoiler hydraulic station power (KW) 3 Depend on actual design
7 Total power 36 Depend on actual design
8 Power AC480V，60Hz，3 Phase

Supply List Of Steel Deck Roll Forming Machine

No. Name Qty. Remark
1 Decoiler 1set
2 Guiding device 1set
3 Forming system 1set
4 Cutting system 1set
5 Output device 1set
6 Hydraulic system 1set
7 Electrical system 1set



https://www.jinggongmachine.com/products/steel-deck-roll-forming-machine.html