Description Fig 2202 Hammer Union
Working Pressure:
15,000 psi(1034 bar)

Features:
Meets National Association of Corrosion Engineers Standard MR-01-75 and American Petroleum Institute RP-14E

Heat-treated components are 100% tested for hardness

Fluoroelastomer seal rings

Butt-weld only

Stamped "sour gas" using low-stress dot stamping and painted with a green zinc-chromate primer to assure quick identification



Recommended Service:

Especially designed for sour gas service.
#Fig #2202 #hammer #union #oil #drilling #equipment #manufacturers
https://www.rdpmc.com/fig-2202-hammer-union.html