If you own a porcelain kettle, you know how frustrating it can be to have it stop heating. You pour water into the spout, but the appliance doesn’t heat up. This could be because of a clogged spout. However, it could also be because of a problem with the heating element.
For china restoration, you need to understand some of its basics. You don’t need to be an expert, but you need to understand the common issues. If your porcelain kettle is not heating, you’ll need to check these points:
Before you begin fixing, you need to know the most common problems and how to repair them.
- Heating element shorted out: If the heating element shorted out, the porcelain coating could crack. That’s when the water supply to your heating element stopped.
- Heating element clogged: If the heating element is clogged, there’s too much water inside it. That doesn’t allow the water to heat up.
- Heating element broken: If the heating element is broken, you might be able to use a new heating element. It should be similar to the other heating element.
- Thermostat issues: If your thermostat is faulty, the heating element won’t heat up. The thermostat is the part of the system that controls water flow.
Thermostats control the flow of water to the heating element. They’re found on the heating element and on the spout.
The thermostat senses the temperature of the water. It controls how much water flows through the heating element.
If the thermostat is faulty, the heating element won’t heat up.
To restore porcelain, you need to know how to repair the thermostat.
If you have a porcelain kettle that is not heating with a new water supply, you can try one of these two repairs.
If the heating element is broken and needs replacing, the heating element will be the same as the new one.
If the heating element is broken and the thermostat is faulty, the heating element will be similar to the one you removed.